[MS101HX50LF1] 1024X600 10‘’ LCD display ,10inch TFT LCD screen optional wiht
MS101HX50LF1 is 1024x600 dots 10.1" color tft lcd module display with HX8282+HX8696 driver,Optional capacitive and resistive touch screens,superior display quality,super wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI..It can be used in any embedded systems,consumer electronics,car,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface.
1, General Information
MS101HX50LF1 is a color active matrix LCD module in corporating amorphous silicon TFT (Thin Film Transistor). It is composed of a color TFT-LCD panel, driver IC, FPC and a back light unit. The module display area contains 1024x 600pixels. This product accords with Rosh environmental criterion.
2,Features
| No. | Item | Specification | Unit |
| 1 | Panel size | 10.1 | inch |
| 2 | Number of Pixels | 1024(H)*3(RGB)*600(V) | Pixels |
| 3 | Active area | 222.72 x125.28 | mm |
| 4 | Pixels pitch | 0.2175*0.2088 | mm |
| 5 | Module outline | 235 x143 x4.5 | mm/ |
| 6 | TP outline | 234.5 x142.5 x2.0 | mm/ |
| 7 | Pixels arrangement | RGB vertical stripe | / |
| 8 | Display mode | Normally White | / |
| 9 | Viewing direction | 6 O' Clock | |
| 10 | Display color | 16.7M | |
| 11 | Luminance(cd/m2) | 400(typ) | Cd/㎡ |
| 12 | Backlight Type | White LED | |
| 13 | Interface Type | RGB | |
| 14 | Input voltage | 3.3 | V |
| 15 | Drive IC | HX8282+HX8696 | |
| 16 | Operation Temperature | -20~70 | ℃ |
| 17 | Storage Temperature | -30~80 | ℃ |
3,Pins and interface
| Pin No | Symbol | Function |
| 1,2 | VLED+ | Power for LED backlight (Anode) |
| 3,4 | VLED- | Power for LED backlight (Cathode) |
| 5 | GND | Power ground |
| 6 | VCOM | Common Voltage |
| 7 | DVDD | Digital Power |
| 8 | MODE | DE/SYNC mode select. Normally pull high |
| H: DE mode. L: HSD/VSD mode | ||
| 9 | DE | Data Enable signal. |
| 10 | VSD | Vertical sync input. Negative polarity |
| 11 | HSD | Horizontal sync input. Negative polarity |
| 12-19 | B7-R0 | Blue Data |
| 20-27 | G7-G0 | Green Data |
| 28-35 | R7-R0 | Red Data |
| 36 | GND | Ground |
| 37 | DCLK | Clock signal |
| 38 | GND | Display on/off |
| 39 | SHLR | Left or Right Display Control |
| 40 | UPDN | Up / Down Display Control |
| 41 | VDDG | Positive Power for TFT |
| 42 | VEEG | Negative Power for TFT |
| 43 | AVDD | Analog Power |
| 44 | RSTB | Global reset pin. Active low to enter reset state. |
| Suggest to connecting with an RC reset circuit for stability. | ||
| Normally pull high. (R=10KΩ， C=1μ F) | ||
| 45 | NC | Not connect |
| 46 | VCOM | Common Voltage |
| 47 | DITH | Dithering setting |
| DITH=”H” 6bit resolution(last 2 bit of input data truncated) | ||
| DITH=”L” 8bit resolution(default setting) | ||
| 48 | GND | Power ground |
| 49 | NC | Not connect |
| 50 | NC | Not connect |
4,Drawings
5,Absolute Maximum Ratings
|
Item |
Symbol |
Min |
Max |
Unit |
Conditions |
|
Digital Supply Voltage |
VCC |
-0.3 |
3.96 |
V |
|
|
TFT Gate On Voltage |
VGH |
-0.3 |
40 |
V |
|
|
TFT Gate off Voltage |
VGL |
-20 |
0.3 |
V |
|
|
Analog power supply voltage |
AVDD |
-0.5 |
5 |
V |
|
For more details pls contact maoshengelectronics@hotmail.com or WhatsApp +8618575525695
